FZRSupport: the FZROnline Archive

I've got an FZR400 with a 600 motor, set up for road race use. It's got a later model swingarm (I believe one of the 'Deltabox' style) ones, 17" CBR rear wheel conversion, with a rear shock off a 20xx GSX-R600. I'm planning to have the rear shock resprung and revalved this winter, to get ready for t...

Found one, thanks!

Thanks for the info about the VR vs. Hall sensor, good to know!

When the FZR TCIs fail, do they typically just "go"? Any idea what the common failure modes are?

Anyone have a spare, by chance?

I'm in Oregon.

Thanks, Patrick

Took a close look at the flywheel with the starter turning. It's got a pretty significant taco to it! Someone probably dropped it at some point, my guess. At first I thought the crank might have been bent but I checked the runout and it's fine. Can't help but wonder if that had something to do with ...

Race season is coming up quickly and I'm behind the curve!

Looking for an FZR400 flywheel (rotor).

PayPal ready to send! I live in Oregon, hope you can help! Thanks!

Here we go, for the 3HE box with 400 pickup coil: http://fzronline.com/forum/viewtopic.php?f=7&t=12271&p=99497&hilit=fzr600+tci+with+fzr400+ignition#p99497 That look correct? Still would like to know about pickup sensor gap if you have info, please! Related question: did ALL 600 motors have "concave...

Thanks for the feedback, very helpful! I will try new gas. The stuff I put in it isn't by any means brand new (a few months old), and the stuff here in Oregon can go bunk pretty easily. I did clean the carbs prior to trying to light it up, including a clean sweep of the pilot circuit. Also had check...

Hello, first post to this forum! I picked up an FZR400/600 racebike last November, and have been working on it over the winter, to get it ready for the 2015 season. I'm wondering about the compatibility of different flywheels between the FZR400 and FZR600. Are the pickup tabs on both flywheels in th...