FZRSupport: the FZROnline Archive

Thanks for the reply, so to attach one headlight, do I jus ditch one side off wires or combine them for a single headlight? Well parking light wires are all over the shop and no longer have the correct colouring, also found 2 wires, blue/yellow, black/yellow on each but only 1 other one for them to...

Just me again, since having this bike I'm getting nothing but problems lol already rebuilt engine and is running sweet apart from misfiring (been like that since I've had it) so I know it needs new coils and there in bad shape. But it's idling at about 3k and I've stripped and rebuilt carbs to no jo...

Thanks for the reply, so to attach one headlight, do I jus ditch one side off wires or combine them for a single headlight? Well parking light wires are all over the shop and no longer have the correct colouring, also found 2 wires, blue/yellow, black/yellow on each but only 1 other one for them to ...

Hi, I'm looking into a streetfighter headlight, problem is I have 2 lights, one for main and one for parking, the parking one is jus a bodge job of led strips which previous owner fitted. But is there anyway to convert them to a single headlight rather than 2? Or will I blow a fuse with a simple joi...

Found the online manual so hopefully sorted : )

Hi again, engine completely stripped, all new gaskets etc... Are here so just need to know torque settings for cyclinder head then can shaft covers then valve cover thanks : )

Mines on the main frame, I might have my terminology mixed up like but subframe is what holds passenger seat and rear lights etc.. ? Riders seat still clips in : )

Was thinking about removing rear subframe to make bike a solo seater, I have found a nice position for tail tidy to go, jus not sure atm how I'm gonna make it look fairing wise or where to mount rear light, also get a jack up kit. Has anyone else done this to there's, I love the look of some other b...

Never thought about copper pipe straight down to create a smaller gap, only problem is I have the expander half opened past the threads which I can't get out so bar weights are on atm till I can get it out, thanks for idea though

My diameter is 7/8 so bought some bar end mirrors for them, they use them metal clips and no matter what I've tried I can't get them to work as threads are in way for the clip to expand proper, any suggestions on mirrors as I'm going down the streetfighter route thanks

Newbie mistake, never go off a YouTube video, sorry for confusion : )

Oh right, I thought there was 4 cyclinders to measure for each?

First of all, hi. Just bought a fzr600r 94, about to do the shims, purchased fresh oil, valve seal and gasket. I know all measurements for clearances and general idea how to do it, what I don't is how there is 2 shims per measurement so how will I know what one is off? 4 in, 4 ex, but 16 shims, hope...