FZRSupport: the FZROnline Archive

As it says in bed of a transmission set any help wolf be greatly appreciated. 3rd gear is toasted popping out under load. The dogs are rounded pretty badly. Maybe can do some part swapping of I have what you need. Thanks in advance.

Found one at parts store well trans went all to crap the other day ( wouldnt shift past 2nd). Sence it wasnt a strong one i swapped motor out from my parts bike. Come to find out its popping out of 2nd and 3rd under hard pulls. But put thermostat in and seems to be warming up and running up to temp.

Jetting on the main jets are107.5 i got 2 other sets of carbs and they have the same size. Ive not messed with the needles or seen where they were set at. Thinking the needles are ok at the postion they are in now, it being so far in the R's. I plan on replacing the thrermostat but seeing if there i...

finally got the bike on the road runs good. except high rpm studder about 9500 rpm on long hard pulls and bike is running cold temp. pretty sure thermostat is stuck open or it has been taken out. wondering if there is a automotive one that fits and functions the same or am I going to have to drop 60...

well most likely will do a switched ckt just for the warmer weather just to keep on the safe side

Noticed the bike I recently bought had no thermostat and also noticed the cooling fans never did come on after I got her running. Any body know if cooling fans come on constantly or at a certain temp., figuring a certain temp. Just wanting to make sure cooling fans are working. Also do the 600s have...

heres the set i bought guy had two if they look this dencent when they get here i think ill be good

http://www.ebay.com/itm/251439175473?ss ... 1439.l2649

the carbs i have some jack ass had swapped them around the throttle cable was zipp tied to them to work and linkage was missing so is the bracket for the idle adjustment id rather start with a complete set of carbs that need cleaning and a lil work then to spend countless hours find brakes and every...

mainly looking for left lower fairing and both tail fairings ill pm ya

looking for a complete fairing set. looked on ebay cant find any with all the plastics . let me know where you have found yours or if any body has some for sale on here

got her running today carbs are all to hell. ordered a set off ebay for 42 bucks hope they are decent shape looked to be from the pics

ordered some shims threw local yamaha dealer 1.50 a peace and can ya tell me how the throttle cable bracket mounts on the carbs the jackass zip tied it and want to mount it right pic would be great

found a online manual helped alot http://commline.com/FZR/600/MANUAL/ cant remember where i found it

thanks ima get a manual asap and go from there see whats my best option

dont have a manual but def be getting on asap and suggestions on a decent one? Sense my valves are so tight would it be smart to get the smallest shim and start from there???