FZRSupport: the FZROnline Archive

Hi back again. After replacing the clutch everything is running a lot better apart from in second gear. After doing some research I see slipping in second gear is a common problem but is it an easy fix? I'm pretty mechanically minded just don't want to dive in if its a massive job or not even worth ...

Oh and sorry anyone know of best/cheapest place to source the parts in the UK?

Thanks.

Thanks for all the advice. big thanks to GreyImport for sending me a manual. Any advise what friction plates and springs to go for?

Cheers.

Before ripping the clutch apart I hear people use the yzf750 complete clutch with little modification. Is this worth doing or not? Which is the best manuals to get, Haynes? At there any downloads? Is tearing out the clutch a particularly big job?

Thanks

Checked lock nut and is tight. I'm not sure if the problem could be clutch related, just went out for another ride and the best way I can.describe it is like someone pulling in and realising the clutch very quickly 3 or 4 times and then accelerates no problem. Any way I can test clutch to see if the...

Adjusted pilots and seems to be running a little better but will give them a proper strip down and going over soon. Just went for a ride and another problem that is abit worrying is under hard acceleration the bike hesitates then there feels to be almost like a bang from the rear wheel and of it goe...

Brilliant thanks. is that 3 full 360 turns? Also any ideas on dry float height? And needle height position? Only mod is a slip on yoshi can. Am I rite in thinking I don't have the expulsion tubes?

Thanks.

Anyone have any ideas on a place to start with mixture screws settings? Forgot to mention it also has an occasional pop from the exhaust, would this suggest running rich?

I have just bought an 87 genesis and having a running problem. In the low rev range the bike is very lumpy and does not pick up properly til about 4k. The problem seems to get better as the bike gets warm but still there at low revs. After doing a bit of research I see it could be the emulation tube...