FZRSupport: the FZROnline Archive

Hi All, I am doing this for my R4 project bike. For the speedo I will use a GPS sender. http://litetek.co/R4/Guide_R4_InstrumentCluster.html For the tacho I had some PCB boards made. I will be selling them at a very reasonable price once they have tested to be functional. Unfortunately I will not ha...

Hi All, I finished kits for the 3LN1, 3LN3 & 3LN5 & Zeal. http://www.litetek.co/ReplacementPartsYamaha.html The parts I referred to in the previous post are for the 3LN6 & 7. This page shows a cross reference for the carb parts http://www.litetek.co/Guide_FZR250Parts.html I also made a video about t...

Greetings, I am producing these kits for almost the entire FZR range as well as other motorcycles. At the moment the FZR1000, YZF750, FZR600, FZR400(3TJ & 3EN), FZR250(3LN1) series are available. Everything, except the choke plunger seals, is made from Viton (FKM), which is long lasting and resistan...

This might be helpful as well.
http://www.litetek.co/Guide_MikuniBDST_ ... gAssy.html

Greetings All, This post has been edited. 12th April 2013 See next post. If you have problems with your motorcycle running too rich then please read the assembly guide under the 'Jet Housing Seal'. This is a critical component on all these BDST type carburettors and it is significant because these s...