FZRSupport: the FZROnline Archive

Hi, after measuring the sparkplug cap after cleaning gives me a reading of 16.08. If i change the resistor to a 5 ohm and 5 ohm from the sparkplug will that be sufficient to get the 10 ohm that yamaha state you need. Did i read on here somewhere that 5 in the cap is enough and would be unlikely to c...

Ok then i will have to try and repair what i have rather than replace the front
fairing, bits missing from it and a few cracks in it.

IF i was to fit the front fairing from a later model FZR 1000 what parts would i need from the donor bike to make it fit the 1990 model, say if i got the parts from a 1992 model, i know that the forks are USD on the later models, but would the mountings for the stay bars be the same as the '90 model...

Thanks for the info, i'll try and keep an eye out for them and if anyone on here from the UK got a lead on those bits i would be interested in them. I priced them new and they are €43.50 euros each plus vat plus shipping makes them 130 euros for the pair so i will try and find 2nd hand first but bei...

Thanks Stig,

Hi guys, can anyone tell me if the plastic cowling that runs from the front fairing down over the air scoops and holds the reserve switch on the left hand side are interchangeable from any other models, my bike is a 1990 FZR 1000 and those cowlings are broken on mine, would any of the FZR 1000's fit...

Thanks for the prompt replies lads, the bike is 1990 but according to the registration it was only registered in Ireland in 1996 so it came from somewhere else most likely the UK but i can't be certain of that so it's possible the the E in the manual may mean Europe, but i am only guessing on that. ...

Hi all, i am new to the forum having just joined recently, my location is Republic of Ireland and i have just recently bought a 1990 Yamaha FZR 1000 EXUP and it needs a bit of work but it's all complete except for the electric petrol resevoir switch. It does however need to have the carbs rebuilt an...