FZRSupport: the FZROnline Archive

Big update today, been busy this week end, shortened the pivet tube on the thundercat swinger (with a hacksaw), there is a differnece of 20mm in total between a thundercat swinger and a fzr600 swinger first side done, http://i59.photobucket.com/albums/g288/thesake505/IMG_20121005_211323.jpg then i h...

Small update, Basically I chopped up the stock dash (it was cracked and was missing one mounting ear), made a useable standalone Speedo with what was left, I then marked out and cut a hole in the tank cover, used hot glue to secure in place, then fibre glass filler on the inside and car bumper fille...

ok so this should be a quick question, will a set off barrels off of a 4hj fit a 3he?? cheers snake

Just a question for safety. Did you reinforce the top yolk after you drilled through? Sent from my GT-I9100 using Tapatalk 2 hi, the raisers have also been welded on to the top yoke, im confident this will add the extra strength! The yoke had only two holes one for each raiser, these are situatied ...

Hi guys, this is my first post so please be gentle This project goes back around 6 years ago, I bought a fzr 600 that turned out to be a nail. So I bought a 2nd bike that had been dropped for spares. However when i got the 2nd bike home i realised that it was in really good nick (apart from the obvi...