FZRSupport: the FZROnline Archive

Hi, Does anyone have an english fzr250 manual or know how to tune an fzr350 2kr to stock? MY bikes running pretty bad sounds like it goes from 2 cylinders to 4 cylinders as it goes up the rev range. Its slow to get moving but hits a spot where all the power kicks in and is also where it transitions ...

Thanks for the reply. I have done a stem swap recently for a Cb750 wasnt much of a hassle. from what I know the 250 3LN has fatter forks but can the stem fit in the 2KR with original bearings?

Hi people, so my forks on my 250 2KR are now pitted too low and tearing up any new seals put in. Instead of having them re-chromed I though I may as well go for a front end swap. My front wheels is giving up a bit too, disc is warped, bearings need replacing and the bolts need to be taken out and re...

Hi

Does anyone know what size screw the engine temperature sensor is which screws in on the radiator cap? Specifically the 2kr? And does anyone know the normal temperature range for normal running and what temperature is considered overheating for the engine?

THANKS!

Hi

Does anyone know what size screw the engine temperature sensor is which screws in on the radiator cap? Specifically the 2kr? And does anyone know the normal temperature range for normal running and what temperature is considered overheating for the engine?

THANKS!

Great thanks a lot

Great thanks a lot

Cheers

Hi all just wondering if anyone could help me out. What pitch is an FZR400 rear sprocket? I have heard it a 520? And am i correct in thinking that it can be fitted directly to the FZR250 rear wheel? Im building a project bike with a different engine so the drive sprocket is already 520 pitch.

Hi all quick question! What is the FZR 250 3LN front wheel bearing dimensions? thanks

Hi all, this is not really an FZR250 specific question. W+i would like to find some forks which would work with FZR250 3LN wheels. Im building a bike and I cant source FZr250 forks so are there any other forks out there which will work with the rotors of the FZR wheels? thanks.

No worries I have found one

Thank you! ill give it a look. You dont happen to have a diagram of the coil assembly do you?

I recently cleaned up my FZR250 2KR and after putting it all back together im getting some strange clicking noise from the right coil which controls the 1 and 4 cylinder spark plugs. When this happens the bikes revs jump. It sound like the bike is running only 3 cylinders then one more starts when t...

haha well either way its a strange button.