FZRSupport: the FZROnline Archive

alright folks back again for another question now im having issues with my tach well i think so anyways just need some input one week ago i was on the highway doing 75 mph in high gear was running right at 7000 rpms two days later on the same highway going 75mph that time i was running 6500rpms but ...

DonTZ125 not to say your wrong but i think your wrong according to the manual and other post i have read with the ignition off i should read between 12 and roughly 14V on another note folks i believe i have solved the problem turns out the PO replaced the bulbs in the headlights i believe the standa...

+1 for don haha thats awesome (im going to call them and tell them they are completely retarded)

ok i have an update my dad thinks the headlights are draining too much power at idle so i checked it with the headlight bulbs pulled out at rest with the bike off it read 13.5V at idle it dropped to 12.5V (it dipped to 11.8V before) ok now heres the kicker at 3000 RPMS it went all the way up to 14.6...

ok so i have a question for anyone that has a clymer manual 89-93 for fzr600 i was looking in the back today and i noticed that the wiring diagram for the 89-90 US model was set up for 1 headlight? next thing i saw on the next page was that the 91-93 wiring diagram US model was also set up for 1 hea...

alright man i ran that test you told me and i had no continuity from white wires to ground therefore no short in the stator right. i had the battery on charge all night last night on my trickle charger. i took it off charge and sitting with ignition off i was reading 13.89V when i started it up it j...

hey man i will definately check that out when i can get my hands back on that volt meter that reads ohms i will post on here tomorrow what i find out thanks for the idea

ok so heres the deal i have a 93 fzr600 i found a diagram of how to go through and check the entire charging system what i did i started at the battery i have 12.08V thats good ok so then i moved on to checking the battery at 3000 rpm should have between 13.7 and 14.9 mine dropped to 11.46 so i took...