FZRSupport: the FZROnline Archive

would anyone have any fork caps? the ones i got off a breaker have thread damage. just need one but will buy the two off anyone who has them.

yea don i have the spring seat. i bought the bike off a real cowboy who obviously didnt no what he was doin, took me a month to get the carbs right because of all the (non standard parts). i must admit the spring looks slightly shorter compared to standard photos, but the fact is it all fitted befor...

no thats the confusing thing, everything is what came out of the forks. i made a tool in work and split the forks in work, changed the seals and bolted them back together, came home put oil in them. there is a 6" metal sleeve that seems to go over the spring, the spring washer then a 2" spacer but t...

haha, the 6" sleeve seems to fit over the spring, but for some reason the forks arent springing back, when the shocks are back on the bike, they are bottoming out (sitting as low as it possibly can) and not lifting, infact i can unscrew the fork cap and there is about a 2" gap from the top to the sp...

hi i removed my front forks on my 3he fzr 600 to replace the seals. i had parts layed out in garage and when i came home from work, my young daughter had hit all the parts, muddling them up. i got the seals replaced successfully, but when it came to putting the spring in, i cant figure out the order...

does the 4jh airbox fit the 3he model bike?? could someone let me no please??

Thanks stig

Any help would be appreciated guys. Thanks

Sorry mate, my bad. Fzr600 3he model.

Does Anyone no the torque settings for the big end bearings and the main bearings on the crank shaft?

Bit of a random one boys, anyone no the big end bearing and main bearing torque settings? On the 3he engine?

Well when I had it opened everything looked fine, iv seen ecus burnt out and damaged before and it's usually pretty obvious. But thats what's throwing me, is it common for both transistors to go without reason? and has anyone seen them go without showing physical damage(burn or scorch marks)?

Checked that mate, with ignition on or off the blue/yellow wire has continuity to ground.is it just those two transistors that usually go, or is there any other thing?

Hi I just wanna say thanks for the help Iv got, but iv still been having a bit of trouble, unfortunately since i last spoke I have changed the fuel pump and pickup coil and stator, I still dont have a spark at either of the ignition coils, I'm now thinking cdi/tci box, I have had the box open and ev...

well i measured the primary resistance (red/white to grey and orange) wires and i got 2.8 - 3.0 ohms on my draper multi meter. i measured secondary resistance between the leads 1+4 / 2+3 and according to the wiki no start thing you sent me don, i should be getting between 9.6k - 14.4k ohms, i was ju...