FZRSupport: the FZROnline Archive

hi remember the age of ya plug leads and caps,they do deteriate over time being copper inside..

hi easy dont look at the speedo,problem solved...LOL...

hi,swap the relay under your left rear side panel."the 11 pin"these can get water in them but you cant see it.they are cheap to buy.also clean the main earth wire conections.you can get a false reading on these with a meter due to damp...

hi,gear your bike to your needs.i live in the uk so 0-100 is my thing,i dont need a high top speed.so go for what ya want.happy riding

hi the paint is after market,as for up grades,ohlins rear and upgrade the front fork springs and fork oil...nice bike...happy riding...

hi ive used mathamatics to work this out and the answer is it will be fine..when i say mathamatics,i mean i asked my dog and he always barks twice for yes... ...let us know how ya go with this one....

hi why not just buy a ducati !!!!!!

hi try ebay,if you find some 88 parts for sale email them as not all parts are listed.they may have your part.i have found parts this way hope this helps

hi i have a hugger from a 94 fzr 600 that i dont need,you can have it for $10 plus shipping but i am in the uk.let me know if you want it.thanks bokka....

hi clanky,great picture of the fzr with the volvo owners club looking on...LOL...

:cheers: hi clanky,"the assembly grease" is to do with pressure and contamination the only thing that should be in the brake system is brake fluid.you can get the o rings from powerhouse automotive ltd,39 bailey street sheffield,s1 4eh.tel 0114 2811395....email enquiries@powerhouseautomotive.co.uk s...

hi clanky,i had the same problem with my rear caliper its just due to age.all you need to do is clean the caliper with methlated spirit and replace the seals including the small o ring but do not use grease only use brake fluid to lubricate the seals,when you put the pistons in turn them in like a s...

hi,ive measured the distance on mine its 1/2 inch each side between the swing arm and footrest bracket and 1/2 inch from frame to gear lever.look at the footrest it should be square to the frame.if its pointing back the welded bracket is bent.check the wheel alignment to make sure the frame is not b...

FOR SALE,size 10 shoes slightly scuffed only done 200 yards.£2 cash for quick sale...LOL...

hi i think you mean it runs but wont ride,bypass the clutch switch with a bit of wire,if its the same then bypass the side stand swith with a bit of wire.hope this helps...