FZRSupport: the FZROnline Archive

you definately need to post up more pics of your bike, thats without a doubt the nicest looking fzr ive seen yet.

gotcha, thanks for the help guys!

You will use all 4 wires from the wire harness. You will add one black wire to the group that will extend to a point on the frame as a ground. Red Wire - - - - - - - - - - Black Wire White Wire White Wire White Wire Take a look at the link one more time as there is a diagram showing this layout. Th...

I think you misunderstood my question, I want to know where to put what wires leading from my harness to my VR.

Ok i understand what to do now to keep my old VR working, but is the wiring setup the same as with the YZF VR, as in where to plug in what color wires?

unfortunately my funds are severly limited and I have no moolah for a new regulator, but this leads me to my next question, can I rig my four pronged connector to work with my fully functioning FZR VR. I have the old six pronged ( with five wires leading into it and a blank spot as I stated before) ...

I have a 1998 fzr 600 and had to replace its wiring harness, now the problem i run into is the regulator and rectifier on my bike is a 6 prong with a blank in the middle towards the bike, while the plug is 4 pronged, I tried running with it unplugged and quickly learned the error of my ways. Is ther...