FZRSupport: the FZROnline Archive

Trying to find correct key blank to order for my bike. Anyone know if the keycode is stamped anywhere on the bike?

looks like the nissans you mentioned above are what is called the Stanza in the USA. Ill check out thermostats for them


I will try the beck arnley 1430684 160 degree F thermostat

Thanks for the info.I thought Yamaha stats on far was 82c

My bike has always been one that has run hot. especially here in Texas. Moving down the highway I can get it to cool down to normal temp but once I stop at a light or traffic it creeps up to 3/4 of the way or pegs at high. I have to resort to using my fan with a manual button. Im interested in tryin...

check to make sure the lever brake switch or the foot brake switch isnt sticking.

New cable still too long. Anyone out there sell adjuster s crews that are extra long?

Actually the cable is correct. It is labeled 05-0145 but was old stock dated 05/12. I called Motion Pro and the tech checked the cables they have and found that there might be an issue with mine. They are sending me another one for free. Here are some pics of my cables. What is screwing me up is the...

For sure. I sent an email to motion pro as they say they stand behind their cables. Only way I can get it to work would be if I can find a adjuster bolt for the handlebar that is about 2 inches long on the threads. I'll wait on them before I order a new OEM one.

Found the issue willandrip. The motion pro cable is about an inch too long. Plus the part that engages in the clevis at the actuator is too narrow. I'll have to find another cable. Probably just go with a OEM cable. I'll try to contact Motion Pro but being how I bought it on eBay they probably wont ...

There are a few scenarios here. Firstly; is the cable inner the exact same length as the old one ? (Do not take the makers description for granted...mistakes in production occur. Do a visual comparison I just went to fit a cable bought for an R5 6 mths ago at the weekend; its miles wrong !) Next......

Felt my clutch cable let go a few weeks ago and I bought a new Motion Pro clutch cable. Part # 05-0145 Confirmed that yes my cable strands were starting to snap ay the lever and installed the new one. At this point I took the cable cover off and cleaned up and re-greased the actuator assembly. I go ...

Yes, sorry............I still need these.

pefrey wrote:What bike?

Do you mean 25 and 26 in this picture?

remove carbs and completely clean. Do yourself a favor and get a complete o-ring kit as well. re tune http://litetek.co/Carb_Kit_Yamaha_FZR600.html New battery Oil and filter change new chain if rusted or remove chain and soak in parts cleaner check tires for dry rot Drain and refill engine / radiat...

Hi all,


I have a slight tick coming from my valve train area that comes and goes so I think it is a tiny exhaust leak. Does anyone know what size the gaskets are? I've re-used the old ones like 4 times already so it's time to replace.

Thanks

I just rebuilt my master cylinders and cleaned out my calipers last weekend. Did it all with basic tools, a air compressor and brake cleaner spray. Even reused all the seals. Brakes are 100% functioning now and no leaks.