FZRSupport: the FZROnline Archive

What do u mean "a no spark condition and a bad pick-up coil"

The pick up is not the cause of no spark?

I have done the "no spark? Now what" page and checked everything else..

The pick up has no reading so I know that's bad. But the reading when I touch the block is what has me clueless.

And I'm not sure if the coil is good or not

The reason I'm testing is no spark and I have checked and changed everything else.

No one can help me with this?

I need some help with my pick up and coil. Coil plug test http://i1375.photobucket.com/albums/ag447/rainbowdash81147/Mobile%20Uploads/57F2EC05-DC3F-4640-A71C-2EC829990C8B_zpsisvmcvs3.jpg http://i1375.photobucket.com/albums/ag447/rainbowdash81147/Mobile%20Uploads/78F53172-71EA-4BD5-BC80-0D2BDB19239A_...

I just tested the coils by using wire plugged into the harness and striking ends together and I WAS getting spark on all four plugs. so I plugged the harness back in and..... no spark. so where do I go from here? My friend thinks it could be pulsar is bad.

So the numbers are good. Cause I took that set off and replaced them with another set I found that ran the same numbers except on the plug wires. It was at 32.6 And if my coils are good than what could be wrong with the bike. I already replaced the control box and the relay. I have checked the wires...

Really? I was under the impression that there was a reading from the connector to the plug wire

I got pictures of my readings. http://i1375.photobucket.com/albums/ag447/rainbowdash81147/Mobile%20Uploads/EB799FA0-40E4-41C1-9F4E-1F4600C89F57_zpsmbbgl5gd.jpg http://i1375.photobucket.com/albums/ag447/rainbowdash81147/Mobile%20Uploads/2EEB033E-5869-4093-85AC-481CF4E8E7C6_zpssqfnlexq.jpg http://i137...

Is this reading saying that I need new coils or do I have to ground the coils before I can get a reading?

So why am I not getting a reading when I try testing the coil from both ends. And there is no reading on all four wires

well i just checked the coils and i get readings when i do the both sides of the plug and i get a reading when i do the cap wires, but i dont get a reading when i do plug to cap

[/URL]

ok so i pulled my coil pack off and checked my caps and I'm only getting 4.89 ohms on the plugs and when i pulled them apart I checked the resistor and same number. So is there a place I can get new resistors? or do I have to order new caps? And can someone point me to where I can get them. thank you.

I had the bike up and running for a bout a month then right back to where I started. So I have a question.. could this be a bad ground?

I have a 93 FZR600 that will not start. I changed the spark plugs and did a oil change on it. the bike ran fine a few months ago then i parked it in my shed. When I went to go far a ride it would not fire up. i checked it out and I found out that its not getting any spark. So I tried to jump it off ...