FZRSupport: the FZROnline Archive

there is more to it. i have the clutch cover off. according to another post i through out there i have a broken pushrod. i am looking for how to remove what i believe is the pressure plate which has 5 screws on it and is the first thing you run into under the clutch cover.

Can someone help me out with detailed instructions including pictures of the steps to take the push rod out without destroying anything and be ridiculously over the top annoyingly explicit about how to do it? I really dont want to mess up the clutch and everything else included in there. Thanks so m...

nate did you get my pm?

what is the over/under on number of people asking for plastics?

pm'd

i mainly will be driving this to work on a freeway in AZ. The summer heat can really tear a tire up. I drive to work about 15-20 minutes away. I am beginner rider so safety would be of the utmost importance.

looking for rear tail fairing that is above the taillight Passenger seat lock or the whole lock set including ignition, gas cap, helmet lock the peanut cover if its in great shape aka no scratches. At the top of the forks there is some crossmember that the handles attach to. I dont know the name of ...

I did a little search here but didnt find quite what I was looking for. 97 FZR 600 What would be the cheapest tire? What would be the best tire? What would be the best value for a tire? What does it cost to mount it typically? Thanks for your help. This is all opinion so please offer it all up there...

good lord this website rocks!!!!!!!!

I figured it out. There is no inner cable to begin with. Where do I buy that cable, how long should it be? Are there any good places to get what appears to be three or four feet of steel cable?

Thanks as always for the help!

-Nic

Wow. Thank you for that description. took me about 3 times going back and reading the directions to figure out what I was looking at. Thank you so much lamer and Dontz. If anyone happens to come into this thread later on...if you dont know the terminology like me, pull up google images and you will ...

ok so i can pop it into second gear from neutral. I think my clutch or gears are gone. the bike will move about an inch forward when i put it into gear and that is it. i think i can rule out kickstand and neutral switch.

how do you attach a drill to that?/

The speedometer and odometer both do not work. The other gauges work though. I have the cable connected to the wheel. Does anyone know how I diagnose this one?

My clutch case was really loose on all the bolts so i tightened them up. Now, when I put it into gear the bike dies. When I initially did this the bike ever so slightly would move an inch forward starting in any gear. I know second gear is on its way out because it has the weird whining sound. If so...

ISSUE RESOLVED: It was in fact the battery. I was able to jump it from my car successfully several times, however I will need a new battery because mine just wont hold a good enough charge. I jumped it by leaving the car off turning on the radio and the headlights so it would draw some amperage off ...