FZRSupport: the FZROnline Archive

thank you all, thanks for the advise, lets close this issue got it started, with the bump attempt. great WEBSITE.

The bike was in a location where i had to be very QUITE, and couldnt start it up because people complain about noise, also been repalcing parts on it like harness, was missing the whole front COWL, headlights, speedo, fenders, missing section of rear end, etc etc, need a new battery and now need to ...

thanks Lamer, Clutch left HAND and gears on LEFT side of bike near left foot BRAKEs are on the RIGHT SIDE. (REAR brakes pedel near RIGHT FOOT, FRONT BRAKES on right hand ) BUMP START while rolling put into gear, release clutch and see what happends right ? Lamer thanks for the lesson, (i already kne...

will order an updated VR, and will see if anything else is fried, tacho dont have to wprry about because the bike didnt have on from the start , will check Fuel pump and let everyone know

thanks for the info, looking at my VR its diffrent from yours, but im sure internally its the same , mine has vents on top (looks like a radiator)
.

Do you know what the terminal controls, im going to change it as the bike doesnt want to start anyways so why not upgarde

HELLO EVRYONE, i just removed my voltage regulator and notice that one of the lower male terminals looks like it is burnt ( im downloading pic) can someone verify if its time for me to do the upgrade of the voltage regulator the connector its self is in good shape (not burnt). keep me http://fzronli...

cool, will try that as soon as i replace the battery, the terminal cracked off it and now needs to be replaced. dam if its not one thing its another.

Put it in gear and try to push it. or pull the flywheel cover and put a wrench on it Does the engine turn over? ("turn over" = crankshaft rotation ) no engine doesnt crank (TURN OVER) the only thing i hear is the starter solenoid clicking, im going to replace the battery, im willing to look at the ...

mk2davis wrote:Anyone have a stock chain guard or know if the 600 chain guard will fit on the 400? I'm replacing a missing one, and want it to look stock(ish).

hi, i have an extra one off my 92 fzr.

OK SO I REPLACED THE SOLENOID (WE I TRY TO START THE BIKE IT STILL JUST CLICKS NO CRANK FROM ENGINE), I WAS ABLE TO REMOVE AND REPLACE THE STARTER AND STILL DOING THE SAME THING, TRIED THE JUMP IT WITH MY CAR , NOTHING STILL JUST CLICKS. IM AT A LOSS OF WORDS !

Tnxs Don for the diagram well noted

WENT and did the screw driver on the solenoid and nothing Happen has a good spark so looks like battery is good. Nothing Happened when I try to start it with screw driver Anyone else confused? I am. How do yo know there is a "good spark" if "nothing Happen" please tell me you attempted a bump start...

WENT and did the screw driver on the solenoid and nothing Happen has a good spark so looks like battery is good. Nothing Happened when I try to start it with screw driver Anyone else confused? I am. How do yo know there is a "good spark" if "nothing Happen" please tell me you attempted a bump start...

OK WAS ABLE TO REMOVE STARTER AND CONNECTED TO THE BATTERY IT DID SPIN , I REMOVED THE PEANUT AND THE GEARS IN THERE WHERE ABLE TO SPIN BY HAND AS WELL. INSTALLED ANOTHER STARTER COIL AND STILL NO START JUST CLICKING, EVRYTHING ELECTRICAL SEEMS TO BE WORKING. IM GETTING STRESSED ! GOING TO BUY A NEW...