FZRSupport: the FZROnline Archive

How much?

Did you adjust the clutch at the engine end? There's a rubber grommet and adjustment screw with locking nut. Sometimes the spring tension can make it seem as though you have the correct play but it still isn't closing properly. Just mentioned it because it happened to me!

Your problem could be the k&n. Too much air for the normal jetting? Might be worth trying a standard filter?

Check clutch adjustment too!

What evil said! Mine needed a little persuasion and fiddling to get it to fit the hole.but they do go!

Try a tap with a rubber mallet also make sure you are supporting the pipes underneath so they run parallel to the sump. A block or two of wood should help.that way you are pushing them in at the correct angle and not fighting the weight of the pipes.

Cam chain tensioner? Carefully remove bolt (it's undrr spring tension) and gently press a screw driver down onto tensioner just GENTLY and see if it will drop down a click. Might sort out the rattle.

Been Long time away but..Is it a 3en1? Ive got a set of calipers from one in the garage if memory serves. I can split em and messure if needed. Or if wanted they can be had for postage cost. Not got 3en1 anymore so redundant! I do seem to remember that they need pad pins though.

my 3tj will do at least two 10lap short circuits on it's battery, and it's running bdk ignition, but it gets plugged in after every use whatever!

dunno if the 600 and 400 starter solenoids are the same, but if they are i've got a 400 one i think somewhere

3en1 and 3en2 should be fine. 3tj will be different, think it's to do with the spacing between ports being different. you can use fzr 600 pipes but they hang lower and need the fairing spacing out. 3tj are probably just as difficult to get hold of! if you want to do some fab. you can adapt r6 ones, ...

think the spacing/angle of the mount is different on the later model.

i'm not sure what model it would be as you are in the US, what is the diameter of the disc?might help the search. i've got a set from a 1wg 3en1, but im in the UK!

120/70 supercorsa pro sc1 front and 160 sc2 rear. though I have heard good things about the maxxis sport tyres too.
blade is running bt012 freont and 021 rear.

ive got both 'flat' discs and the offest type. pm me if you are interested!