FZRSupport: the FZROnline Archive

Lipo batteries are the way forward for your application, they are tiny. A lead acid of smaller size may be substituted and still be more than capable. I have had to do such and remove 20% of the front of the battery box to enable the fitment of an aftermarket shock absorber where the remote res. fi...

In need of help.

Im looking for a smaller than standard battery that will still have the power for the bike.

1989 1000 exup

Im building a street fighter so battery box is not a problem, but the space is.

The bike should have around 200 cca as standard

Des

The exup ecu's can be reflashed/programed. I new a guy who did this for a company using exup engines in a car.
I had these guys in my saved list but know nothing about them? might be worth a call.

http://www.motomatrix.co.uk/ecu-repairs.html

Have you tried to resolder the chip

Des

Thanks DonTZ125

For now will be using the old plates, when the bike gets back on road will replace with new. Just seemed a bit strange

Des

Hi In need of advice Just pulled my clutch apart and on putting back in I noticed that 3 friction plates have 01 stamped on them, and 1 has 02, no other plates except the outer plate with slot are marked. There are 9 plates, including center plate and outer plate that are different 7 plates shout be...

Hi thanks for reply's Mine is an 89 exup so must be different I think Ive worked it out?, the pipe is a breather pipe for the sump. The sump cant breathe through the casting hole due to the oil in clutch. The breather goes into the clutch case air/oil separator which also connects to the crank case ...

Does anyone know what this pipe is for, or where it goes. I know its the return from the oil/air separator in clutch housing but why does it connect to this pipe. It looks like the pipe goes into the sump, why not just empty into clutch housing and drain into sump with rest of oil. ? There's an oil ...

Go for it, iv'e started mine
See welcome page.

Des

Hi I've fitted R1 4XV front end to my FZR1000 Exup 89 street fighter project. As said before you will need complete front. I had to have the stems pressed out the FZR stem made shorter and refitted to R1 yolks, also spacer for top yolk. The stops on the frame cut down. You will also loose your steer...