FZRSupport: the FZROnline Archive

Hey haunter
Sent you a pm
I'm interested in those dogbones
Cheers gus

Good morning everyone . I'm needing some help with the right height on my custom Fzr  400 hybrid . I finally got my baby on the road. I cut things to close and hadn't even left myself enough time to do a test ride. I just finished fastening the fairings and putting on new signals when one of my best...

Dies anyone know if the jt 520 sprocket is mention to be shoulder
Facing away from the motor with the stamped sprocket sizing facing out
The same as the stock 530???

Yea looks like their is still hope !!!!!!!
Reading on the Yzf forum the shoulder side faces away from the motor
And I've got it on wrong and it might clear the frame after all.
Why don't they have an icon for keeping my fingers crossed

No replies now I'm thinking I've gone too far maybe I'm over my head with this bike Now that I've seen most o the swaps are on 600 steel frames. I'm Also thinking that the new jt sprocket has he shoulder on one side . If I flip it over would my chain be out of alignment too much Or would I be ok . A...

Help with chain on my Yzf 6oor swing arm swap. Ok guys here's the issue . The frame is aluminum the motor is Yzf 600r The swinger in now 600r the chain and sprockets are now 520 the shock is Now o8 r6 red. I've ground off some of the frame casing For the upper chain and a little of the lower casing ...

Thanks for the quick reply that helps .
The carbs on it are Yzf but it has some custom box/pod set uP
That blocks the proper tank height . I ve got the Yzf top but no Fzr 400 bottom
And can't seem to find one .

Thanks for the swingarm write ups t cat swinger on ! Next if the forks and had a math question . It looks like the Yzf forks are just a bit taller . My question is do I lower the forks in the triples to match the Fzr height Or flush the top of the forks with the triples and clip ons ? I would like i...

Ok Got it thanks for the input everyone .
I'll keep it simple and leave the length for now and see how it feels.
Cheers

Thanks
cheers

Hello all Thanks for the tips made the cutting and fitting quick and easy thanks mc freeze.... Now I can fit the yzf 600r rear 160 tire ... :notworthy: I'm now on a roll hope some one reads this in the next hour or so lol. Since I'm at it shoud I cut 1/2 inch off the rear and move the chain adjuster...

Hey guys !!! Thanks for all the Tips ..... :thumbsup: I have made quick work of the yzf 600r swingarm to fit to my 89 400/600 fzr I'm just wondering now that I can mount the yzf rim with the stock 160 should I cut 1/2 inch at the back and move the chain adjusters forward to come back close to the 40...

Does anyone have a link I could go to for some ideas ? who has done this mod ? any ideas would be great . Also going to start my yzf 600r swingarm swap . I was thinking of using the drill press to drill the proper diameter after shorting the piviot tube and refit the bearings???? What do you guys th...

Any tips or links on fitting the yzf 600 r gauges in the r6 fairing and still line up the lighting and controls ,

http://fzronline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=23059&width=150&height=113 http://fzronline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=23063&width=150&height=113 http://fzronline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=23083&width=150&heig...