FZRSupport: the FZROnline Archive

http://www.babbittsonline.com They have schematics for most major brand bikes. It's a clear filter that looks clean. Either way I'm sure it will work a lot better installed in the correct position. Thank you for that link I will put that in the WIKI, Link now in the WIKI along with a company that s...

http://www.babbittsonline.com They have schematic's for most major brand bikes.

It's a clear filter that looks clean. Either way I'm sure it will work alot better installed in the correct position.

Ok, it was the o-ring's by the diaphragm assemblies. I always use the Babbitt's online oem parts diagrams. Thanks again for your reply's!

Carbs done.
Tank cleaned.
Fuel filter turned around(was in backwards).
Fluids drained.

I've been looking at the schematic and it says there's o-rings under the main jet? Could it be these? Just want to make sure before they come apart again. Thank you!

Ok, with the carbs "rebuilt", I found three small o-rings laying in the bottom of my spray bucket? Where do these go on the carbs? They are maybe 4-5mm in diameter.

Thanks for the reply's! I will check them out before buying, thanks.

Ok, since I bought this bike a few weeks ago the bike has had a hard time going past 5-6K rpm when riding. Granted, I've ridden it without the airbox on because it didn't come with one. I did pick up an airbox a few days ago and installed the boots onto the carbs (since the box would not go on) and ...

I'm having trouble with this right now. Even with a little lube on both carbs and box I wasn't able to get it on tonight. Maybe in the morning.

On a side note, I tightened the clamps all the way down just to see how tight they'd get around the rubber and they were incredibly loose? 2-3mm's!

I've used it in all of my previous bikes...(1998 ZX9R, 2001 ZX9R, 1992 ZX7, 2006 ZX10R etc). They all ran perfect, never had any problems using Rotella T.

Just wondering because on most ram air bikes they use these to pressure the float bowls. Thank you sir!

I have a '93 FZR 600 and I'd like to find some locally if I can. Any suggestions?

I'm interested in any type of filter as long as it's cheap and works.