FZRSupport: the FZROnline Archive

Hi what are the dimentions of the valve stem seals used in the early fzr600s?

Thanks

Hi I'm currently rebuilding my fzr600 engine. The shells are very worm and i have another crank so go in so i'm going to replace all the shells. Trouble is yamaha have a list of 4 or five colour coded options. Without buying then all and mearsung the clearences is there a way of knowing wich ones to...

based in brentwood essex, would be best to pick these up

fzr 600 wheels, white tidy pair, narrower rear wheel. gpr70s rear could do with changing.Front tyre is good. £35 pair. Wider 18" rear wheels totaly bare £20 each Box of spares thats not required for a race bike so things like indicators rear light, switch gear. tons of stuff. i'l post a pic up at so...

Put together all the parts loosely last night, 3tj front and rear wheels, 3tj swingarm and yokes and R6 forks. Looks like it will end up being very agressive geometry. It all sits lower than standard, swingarm is shorter. So it looks like the rear will have to be raised alot making the steering stee...

With the R6 forks (40mm shorter than fzr((still not got them to comfirm))) and the 3tj triples as shown in the pic above,

I was hoping that would still be able to maintain stock ride height and keep the clipons above the top clamp. The gul wing shape should help.

Thanks for digging that up. Should save a fair bit of money using these disks and the wheel will match the rear 3tj wheel i will be using. Win Not sure how the wheel will fit yet as i havent seen the parts yet. I'l post up everything up on the forum as the project progress's. In the mean time i'l ha...

Thanks George. I did see that i have a 3tj swingarm and rear wheel i'v just got to have a the swingarm bush/spacer sleeved down.

Just brought a front wheel so should start coming together quite fast.

More questions when the parts arrive and it starts going together

Thanks! I'l look to buy a wheel and see what spacers i need to make. I guess it involves getting the 3tj axle and kind of sleeving a spacer inside the forks? Steel or alluminum? As to the cost, 3tj wheels go on ebay for a little less than R6 wheels (but less common), its the R6 disks seem to fetch a...

This is for a 600 but i'v got 3tj yokes so i'l post in the 400 section :) So. 3tj yokes, R6 forks. Will the 3tj front wheel fit?? Or any other 400 wheel that takes a 120 tyre. I was going to use an r6 wheel. But i have a couple of sets of good disks with the fzr600 so i think it would be a cheaper o...

Thanks for the info

i'l have a look and a measure of the EX cam, I have a couple of spaire engines (in boxs) so this would be ideal.

Carbs seem a bit trickier, I'l keep it in mind though.

Thanks

Hi Will the YZF600 thundercat carbs fit and work on the FZR600 engine. Its for racing only so not really worried about losing a little low down ifs the top increases allot :) Are there any other options? Preferably carbs that are easy to get hold of. Can the YZF cams be fitted into the FZR as well??...