FZRSupport: the FZROnline Archive

I lost the only copy of my key, i know... should have copied it to begin with. How do i remove the ignition switch so i can take it to a locksmith and have a key built?

How do you remove the ignition switch? I lost my key too

Ok.

Thanks for your help guys.

Can i shove it back into the plastic connector with a screwdriver?

I couldn't figure out how to post a picture in my message, so here is a link to the picture. The wire in question is the one the one towards the top of the picture that is reflecting due to the flash.

I purchased an electrosport stator and pickup coil which looks like the stator i removed with one exception. In addition to the two plasitc connectors there is a white wire with a spade connector. Does anybody know what this is for and what it connects to?

I have a new k&n that i'll sell you for $40 shipped.

Do i need to remove anything to get to the harness?

ok, thank you for your help

Is the stator cover the one on the left side of the engine when the rider is sitting on the bike?

Does anybody have a writeup on how to replace the stator?

I keep having a similar problem which is caused by one of the battery connectors coming loose. Once i tighten the connector back up the problem goes away.

These may sound like two dumb questions, but how do i check the voltage coming out of my new regulator and what should it be?

What do you do with the old ground? Attach it to the frame?

I recently had my stock start button fail on me, so I ran down to radioshack and picked up one of these: http://www.radioshack.com/product/index.jsp?productId=2103602&cp=2032058.2032230.2032278&pg=2&parentPage=family It installed easily, fit really well, and only cost five bucks! I'm always out to ...