FZRSupport: the FZROnline Archive

I just did a yzf front end swap not R6 and it is cable but it isnt working right idk whats wrong.... someone help.

its low... but i tryed to switch the fzr and yzf one the yzf is bigger for there wider axle.

Got a yzf 600 front end upgrade put on my Fzr600. Forks brakes tire. First speedo was off by 10 I have stock Fzr cable on it. Then I switched just the cable to the yzf one like just the inside metal spinning part and it put it off even more then just stopped working. I need a fix soon before I get a...

alright thank you for the information i will get new plugs and etc and go from there

okay and i cleaned the carbs pilot jets were gummed up. now i can get it to idle and run good but it still doesnt sound right and it sputters thru the revs till about 8g then it is smooth. but from my fzr knowledge it sounds like it is not running on all 4 cylinders cuz mine will foul a plug every o...

if u are talking about the front of the arm idk i havent taken this bike apart and i dont plan on it to get a good measuring but at the end of it... on the rear where the tire is it measures 11 inches. sorry i cant be more help

I just went out with my friend to get him a bike, we found a nice F3 looks great ran pretty shitty but he wanted it so okay. the symptoms it will only start on choke all the way there is no intermediate on the choke either, on or off. and when it does start it sounds like its not running on all four...

hey i have had really bad carb problems lately too i cant tell if its running rich or lean so i can fix it.
i know it is bogging and lossing power but how do u know which is the problem.
i does it from 4 to 7 now and its driving me crazy..

Thats all i said because i didnt know about the other stuff i thought i had seen some for the fzr but i cant remember where so it would of been pointless to say anything about that i just wanted to give him ideas so he isnt sitting wondering when he will get a reply

you should upgrade the front end and almost any new front end will have a bolt on solution

why dont i have the bike in gear? and if i put it in neutral and have the chain still on i can just do it like that right?
Does anyone know the torque specs?

For the front sprocket what size nut is it exactly? I dont have anything big enought for it i need to go get one btw i am doing this by hand no airgun so if u know the easiest way i would appreciate the shared knowledge :) oh dont say well the easiest way is an airtool cuz i dont wanna hear that... ...

With the pods i would go to stage 7 if u dont mind it bogging a little when u first blimp the throttle from idle besides that it is amazing when tunned right i could keep up with my friends 1000 in top end till i toped out it was really smooth thru the whole rev range to

oh my bad

all they have is exhaust for the fzr tho no plastics