FZRSupport: the FZROnline Archive

Nice. . If anything, the jet kit will compliment the tubes.

I would say that may at least part of your problem.

Might want to also check the vr flow chart. It has the resistance readings that can help out.

http://fzronline.com/wiki/doku.php?id=v ... flow_chart

I remember when I dragged my old 600 home. No spark. Turned out to be my pick up coil/stator. Just something I thought to add in addition to what don suggested.

Hey Paul, Got your PM. From the looks of this pic http://images.powersportsnetwork.com/fiche/images/YAMAHA/1989/Motorcycles/317_waterpump.gif and from what I get from your question you're talking about #12? It does look like the pump can be removed. I've not actually done a swap as mine has not give...

Not normal unless somethings loose. Where is the rattle coming from? Is your bike an exup with the stock header? Could be the valve needs service.

Another Sweekster approved build

Blue spot R6, Thundercat (U.S. YZF 600r), Thunder Ace (U.S. YZF 1000R), early r1 , FZ1 Silver Spot, and R1 gold spot are direct bolt on and will work with the master on the 90+ 600 forks. The best of the group I mentioned are the gold spots (pistons are Teflon coated). The others are a cosmetic chan...

Have managed to fit thundercat master cylinder while retaining mirror stay by using a lower profile reservoir and bracket mounted from top yoke by using the screw threads at the end of the top fork clamp. Used a bit of threaded rod and made a spacer to slide over part way to get clearance for lockn...

The '91-92 had the single headlight, with the associated birdcage and upper fairing. I believe the side and belly panels were all the same. Correct. Side panels and tail are the same size for all years As far as I know, any year FZR600 fairings will fit. As for the 400 fairings, I don't think they ...

Well blimey...linked the wrong pump. Fixed..

http://www.fzronline.com/forum/viewforum.php?f=59 < click there...for the fighter section.

Could get this http://www.summitracing.com/parts/mrg-12s/overview <--click there instead...