FZRSupport: the FZROnline Archive

Well I took the oil pan off to change the gasket and now I'm wondering what I should torque the screws to when I put it back on, does anyone know? And its a 92 600

TIA!

huh try to find the wiring diagram for it there should be one on this site some where and trace the wires does it do it with both the foot brake and the hand brake might narrow it down if its only one or the other I've been looking at that, but it only happens when I pull the front brake, when I us...

haro504 wrote:check the light sockets for rust

did that, they're clean and all wires are connected, no bare spots on any of them

ok so I disconnected the brake light wires and see if that was the problem, it was. So i plugged them back in, but now the brake light dims instead of get brighter when i pull the brake, what gives? the good thing is that I'm not blowing fuses anymore.

I checked all of the rear wires, is it possible i pinched a wire for the brake light when I synced the carbs and had it apart?

checked that and the only wire thats cut is a blue one that I believe goes to the turn signals but everything else seems to be fine, any other ideas? If i recall that's the headlight wire and it'll blow fuses quick if it is cut or loose. it just started happening yesterday and I've had the bike for...

95FZR600 wrote:re-trace the wiring harness make sure everything is good. Look up around the neck of the bike to make sure their are no cuts or anything.

checked that and the only wire thats cut is a blue one that I believe goes to the turn signals but everything else seems to be fine, any other ideas?

Hi all, I'm having problems with my 92 FZR600, It's blowing fuses for the instrument cluster about every minute. I re did some of the wiring because some of it was pretty shotty. Anyone have any ideas on what could be the problem? Thanks in advance!