FZRSupport: the FZROnline Archive

fresh charge on the battery..... nothing, won't start
checked ohms at VR, .11 then zero
so much for the ebay ad saying it is 100% in working order

Score!
If you don't mind me asking, how much did you pay?

Got my new to me stator installed a few minutes ago Connect the battery, turn the key, nothing whatsoever Good times I'm going to try and pull the battery and charge it before work and try But what the hell, no clicking or anything trying to start it I really need this bike sold. I got an offer of 1...

i think this thread has been more of a note pad for me lol just ordered a new stator, hopefully that will get the bike going so i can sell it checked the voltage for the battery, good i have spark and fuel, might replace the fuel filter while im at it ohms for any combo of white wires at the vr were...

bike tries to start. not getting a reading of anything from the battery or the white vr wires
thinking about buying a stator on ebay, just don't want to waste more money
tci box? any other suggestions?

I took the battery down to the battery shop They slapped it on the charger for awhile I don't remember exactly but I think he said it had 200 cold cranking amps or something Anyhow, got home and tossed it in the bike it fired up then died. Kept trying and couldn't get it to start all the way up agai...

anyone ever seen the inside of a peanut cover like that before?
going to check the stator tomorrow

So the gears appear to be fine but I don't know how I missed this on the inside of the peanut cover http://i163.photobucket.com/albums/t304/delbarry/2011-03-17190904.jpg I don't know what to do. I want the bike running for the guy buying it. Could an old fuel filter be an issue too? Only heard 1 cli...

well i tried spraying starter fluid, didn't start
didn't get a chance to try pushstart
but i worked out a deal with the guy that wants my bike, seems like it could be starter gears but the look fine with the peanut cover off

i bought some starter fluid tonight. im hoping for better weather tomorrow to try and get her running i took the peanut cover off and everything looks fine. i will take a picture tomorrow no metal shavings, just a small "C" shaped indent from when the bike was laid down sometime before i bought it i...

I was expecting something bad in there. I have no idea Its misfiring, I have the tank cover off and airbox just sitting. Tried push starting and the airbox popped up almost an inch I don't have any spray starter stuff so ill have to pick some up I was thinking it could've gotten some condensation in...

i was just having wishful thoughts of it being the VR
here is a vid i just took 10 mins ago of me trying to start

http://s163.photobucket.com/albums/t304 ... -35-21.mp4

I upgraded my voltage regulator last sring to a 99 r6 unit I used the how-to on this forum to get it hooked up But I used the ground from the frame as the ground to the new VR Last Thursday I corrected this and used a short length of 12g wire to connect from the plug on the VR to ground to the frame...

shigs wrote:Was everything back to normal when you replaced the pin? Was it easy to fix and find?

That breaking was the straw that broke the camels back
I'm parting the bike out, its not worth it to fix.

Reach behind the sprocket cover and push it off
I had the same prob on mine
My clutch pin is broken in half, good times